Snow on Your Heat Pump? What to Do This Winter
Keep about two feet of open space around the outdoor unit and gently clear snow, leaves, and drifts away from it. Never chip ice off the coils with a tool, because you can bend the fins or puncture a line. A little steam now and then is usually the normal defrost cycle, but ice that stays on the unit for hours is a reason to call.
Why winter care matters in Mountain Home and Boise
A heat pump heats your home by pulling warmth from the outdoor air, even on cold days. That outdoor unit has to breathe. When snow piles against it, or ice covers the coil for a long stretch, the system cannot do that job well, and the house can fall behind on heat. Winters in Mountain Home and Boise are cold enough for snow, drifting, and frost on equipment. A quick look after a storm, and a little clearance around the unit, goes a long way.
Keep the outdoor unit clear
Aim for about two feet of open space around the cabinet, and keep the top clear as well. After a snowfall, or when the wind packs a drift against the house, check the unit before it gets buried.
- Use your hands (with gloves) or a soft broom to lift loose snow away from the cabinet.
- Clear leaves, trash, and anything else blown up against the grille.
- Keep shrubs trimmed back so they do not press into the unit.
- Do not lean stored items against the heat pump, even for a day.
Never chip ice off the coils
It is tempting to grab a screwdriver, a stick, or an ice scraper when you see a crust of ice. Please do not. The outdoor coil is made of thin fins and refrigerant tubing. A tool can bend those fins or puncture a line, and that turns a winter care job into a repair. Skip boiling water as well, because a sudden temperature change is hard on the coil and the cabinet. If the unit is locked in ice, stop and call us rather than forcing it.
Steam is often normal. Ice that stays is not.
When frost builds on the outdoor coil, a heat pump switches into a defrost cycle and briefly sends heat to melt it. You may see a cloud of steam, hear the system change pitch, or notice the indoor air feel a little less warm for a short time. That is usually normal, and it should clear.
What is not normal is a unit that stays covered in ice for hours, or ice that keeps coming back heavily after defrost. That can point to a defrost problem, low refrigerant, a fan issue, or airflow blocked by snow or debris. In that case, the system needs a technician.
When to call for help
Call if the outdoor unit is iced over for hours, if you have little or no heat, or if you are not comfortable clearing snow around the equipment. We offer 24/7 emergency service when the heat is out. Read more on our emergency services page.
A fall HVAC maintenance visit is a good time to have the heat pump inspected before the first hard freeze, including the outdoor unit and defrost operation. We serve homes in Mountain Home, Boise, and the other communities listed on our areas we serve page.
Frequently asked questions
Is it normal for a heat pump to steam in winter?
Yes, a little steam now and then is usually the normal defrost cycle. The system is melting frost off the outdoor coil. If the unit stays covered in ice for hours, or the house cannot keep up with the thermostat, call us.
How do I safely remove snow from a heat pump?
Keep about two feet of open space around the outdoor unit. Use your hands or a soft broom to clear loose snow, leaves, and drifts. Never chip ice off the coils with a tool, and do not pour boiling water on the unit.
What if my heat pump is covered in ice for hours?
That is not something to ignore. A brief crust that melts during defrost can be normal, but ice that remains for hours, or keeps returning, needs a technician. Call Weller's Heating and Cooling at 208-318-6165. After-hours: 208-598-6833.
Need help with a heat pump this winter?
If the unit is buried, iced over, or the house is getting cold, do not force the ice off. Call Weller's Heating and Cooling at 208-318-6165, open 24 hours, 7 days a week. After-hours: 208-598-6833.