Skip to Content

How Often Should You Change Your Furnace Filter?

Check your furnace filter about once a month during heating season, and replace it when you cannot see light through the material. Most homes need a new filter every one to three months. Homes with pets or a lot of household dust often need a change sooner.

The 30-second light test

Turn the system off at the thermostat, then find the filter slot. On many furnaces, that slot is along the side or bottom of the indoor unit, or in a return air grille on a wall or ceiling. Slide the filter out and hold it up to a window or a bright light. If light does not come through the material, or the surface is caked with dust, pet hair, or lint, put in a new one.

Match the size printed on the old frame and follow the airflow arrow. The arrow should point in the direction the air travels, usually toward the furnace. Then turn the system back on.

How often to change a filter in Mountain Home and Boise

A calendar reminder helps, but the light test is the better guide. Look at the filter every month during heating season, and plan on a new one every one to three months.

Filters load up faster here for two common reasons. Mountain Home sits on the high desert, and that fine dust ends up in the return air and on the filter. Boise and the Treasure Valley see dry, dusty stretches too, especially when the wind kicks up. Pets add hair and dander, so those homes often sit closer to the one-month end of the range.

Why a dirty filter matters

A clogged filter chokes airflow. When the furnace cannot move enough air, it has to work harder, which can mean rooms that never feel quite warm, longer run times, and a higher heating bill. Restricted airflow can also cause the furnace to overheat and shut itself off as a safety step. A clean filter helps keep dust off the blower and the indoor coil, too. It is not a substitute for a professional tune-up, but it is the simplest habit you can keep between visits.

What kind of filter to buy

Use the same size as the filter you took out, usually printed on the cardboard frame. If you are unsure which type to buy, stay with the kind already in the furnace, or ask us on a maintenance visit. A tighter filter is not always better. If it is too restrictive for your system, it can create the same airflow problem as a dirty one. We carry replacement filters in many sizes and can handle filter service for you.

When a dirty filter is not the whole story

Change the filter first if the heat seems weak, the furnace starts and stops, or the blower sounds strained. If a fresh filter does not help, or if you have no heat, it is time for a closer look. Our furnace repair in Mountain Home page covers common warning signs. If the furnace fails on a cold night, we offer 24/7 emergency service. See our emergency services page, or call us right away.

A regular HVAC maintenance visit can catch a packed filter or a dirty coil before the first hard freeze. We serve homes in Mountain Home, Boise, and the other communities on our areas we serve page.

Frequently asked questions

How do I know if my furnace filter is dirty?

Slide the filter out and hold it up to the light. If you cannot see light through it, or if the surface is packed with dust or pet hair, replace it. During heating season, make this a monthly habit.

Can a dirty filter damage my furnace?

A clogged filter restricts airflow, which makes the system work harder and can cause the furnace to overheat and shut down. Replacing a dirty filter reduces that risk, but it does not replace a professional inspection if the furnace is already acting up.

Where is the furnace filter in my house?

Many filters slide into a slot on the indoor furnace cabinet, often on the side or bottom. Others sit behind a return air grille on a wall or ceiling. If you cannot find it, we can show you on a maintenance visit.

Need a new filter, or is the heat already out?

A monthly check takes less than a minute and can save you a service call. If you want us to handle filter service, or if the furnace is not keeping up, call Weller's Heating and Cooling at 208-318-6165, open 24 hours, 7 days a week. After-hours: 208-598-6833.